The Client List Screen - ZyXEL Communications P-660HN-T1H User Manual

Chapter 7 LAN Setup
Table 23 Network > LAN > DHCP Setup
LABEL
DNS Servers
Assigned by DHCP
Server
Primary /
Secondary DNS
Server
Apply
Cancel

7.4 The Client List Screen

This table allows you to assign IP addresses on the LAN to specific individual
computers based on their MAC Addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC
address is assigned at the factory and consists of six pairs of hexadecimal
characters, for example, 00:A0:C5:00:00:02.
Use this screen to change your ZyXEL Device's static DHCP settings. Click
Network > LAN > Client List to open the following screen.
Figure 38 Network > LAN > Client List
The following table describes the labels in this screen.
Table 24 Network > LAN > Client List
LABEL
IP Address
MAC Address
Add
92
DESCRIPTION
The ZyXEL Device passes a DNS (Domain Name System) server IP
address to the DHCP clients.
Enter the IP address of your primary/secondary DNS server.
Click this to save your changes.
Click this to restore your previously saved settings.
DESCRIPTION
Enter the IP address that you want to assign to the computer on your
LAN with the MAC address that you will also specify.
Enter the MAC address of a computer on your LAN.
Click this to add a static DHCP entry.
P-660HN-T1H User's Guide