The Wps Station Screen - ZyXEL Communications P-660HN-T1H User Manual

Chapter 8 Wireless LAN
Table 35 Network > Wireless LAN > WPS
LABEL
PIN Number
Generate
WPS Status
Release
Apply
Refresh

8.5 The WPS Station Screen

Use this screen to set up a WPS wireless network using either Push Button
Configuration (PBC) or PIN Configuration.
Click Network > Wireless LAN > WPS Station. The following screen displays.
Figure 52 Network > Wireless LAN > WPS Station
114
DESCRIPTION
This shows the PIN (Personal Identification Number) of the ZyXEL
Device. Enter this PIN in the configuration utility of the device you want
to connect to using WPS.
The PIN is not necessary when you use WPS push-button method.
Click this to have the ZyXEL Device create a new PIN.
This displays Configured when the ZyXEL Device has connected to a
wireless network using WPS or Enable WPS is selected and wireless or
wireless security settings have been changed. The current wireless and
wireless security settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there is no wireless
or wireless security changes on the ZyXEL Device or you click Release
to remove the configured wireless and wireless security settings.
This button is available when the WPS status is Configured.
Click this button to remove all configured wireless and wireless security
settings for WPS connections on the ZyXEL Device.
Click this to save your changes.
Click this to restore your previously saved settings.
P-660HN-T1H User's Guide