What You Can Do In The Static Route Screens; The Static Route Screen - ZyXEL Communications P-660HN-T1H User Manual

Chapter 12 Static Route

12.1.1 What You Can Do in the Static Route Screens

Use the Static Route screens
IP static routes on the ZyXEL Device.

12.2 The Static Route Screen

Use this screen to view the static route rules. Click Advanced > Static Route to
open the Static Route screen.
Figure 77 Advanced > Static Route
The following table describes the labels in this screen.
Table 53 Advanced > Static Route
LABEL
#
Destination
Netmask
Gateway
160
(Section 12.2 on page
DESCRIPTION
This is the number of an individual static route.
This parameter specifies the IP network address of the final destination.
Routing is always based on network number.
This parameter specifies the IP network subnet mask of the final
destination.
This is the IP address of the gateway. The gateway is a router or switch
on the same network segment as the device's LAN or WAN port. The
gateway helps forward packets to their destinations.
160) to view and configure
P-660HN-T1H User's Guide