Pet Pager Reporting; Table 17: Pet Pager Messages; Table 18: Example Of A Single Transmission - Bosch CC880/LP880, SC8016 Operator's Manual

CC880/LP880, SC8016 | Operators Guide | 28.0

28.0 PET Pager Reporting

The system can be configured by your security
company to report to a pocket pager when an
alarm and/or any system event occurs. When
using either of these two reporting formats, easy to
understand text messages are received so that the
appropriate action can be taken.
Table 17 lists all the events that can be reported in
PET pager formats.

Table 17: PET Pager Messages

Event At Control Panel
AC Fail
AC Restore
Area Has Been Armed
Area Has Been Disarmed
Burglary Zone Has Triggered
Burglary Zone Has Restored
Burglary Zone Triggered, Area #
Burglary Zone Restored, Area #
Access Denied – Codepad Tamper
Data Programming Change
System Is Armed
System Is Disarmed
Codepad Duress
Low Battery
Low Battery Restore
Codepad Panic Alarm
Codepad Fire Alarm (V1.37+)
Codepad Medical Alarm (V1.37+)
Test Report
Zone Automatically Isolated When
Armed
Disarming When Zone Has Been
Isolated
Zone Unsealed At End Of Exit Time
Zone Has Restored After Exit Time
24 Hour Zone Triggered
24 Hour Zone Restored
24 Hour Fire Zone Triggered
24 Hour Fire Zone Restored
The # symbol represents the zone or area number
in the transmission.
Bosch Security Systems | 6/04 | 920036O.OG.162
PET Pager Reporting
PET Message
AC Fail
AC Restore
Close Area #, User #
Open Area #, User #
Alarm Zone #
Restore Zone #
Alarm Zone #, Area #
Restore Zone #, Area #
Codepad Tamper
Data Change
Close User #
Open User #
Duress, Open User #
Low Battery
Battery Restore
Panic
Fire
Medical
Test
Bypass Zone #
Bypass Restore Zone #
Trouble Zone #
Trouble Restore #
24 Hour Alarm #
24 Hour Restore #
Fire Zone #
Fire Restore #
The following example shows how a single
transmission is received on the PET pager. A
similar message to the one below is seen when the
control panel is armed by User 1.

Table 18: Example of a Single Transmission

1111
Subscriber ID Number
The Subscriber ID number is a unique 4 digit
number identifying which alarm system made the
call. Only your security company can program the
Subscriber ID number (Factory Default = 0000).
EN | 19
CLOSE USER 01
System Armed User #1