Lan Configuration Page - Motorola PTP 300 Series User Manual

Motowi4 series
Hide thumbs Also See for PTP 300 Series:
Table of Contents

Advertisement

Web Page Reference
8.3.1.2 LAN Configuration Page
The LAN configuration page
(Figure
31) is used by the system administrator to configure the
300 Series Bridge's LAN interface.
Figure 31 LAN Configuration Page
IP Address: Internet protocol (IP) address. This address is used by the family of Internet
protocols to uniquely identify this unit on a network.
Subnet Mask: A subnet allows the flow of network traffic between hosts to be segregated based
on a network configuration.
Gateway IP Address: The IP address of a computer / router on the current network that acts
as a gateway.
Use VLAN For Management Interfaces: This controls whether the management interfaces
(WWW/SNMP/SMTP/SNTP) use VLAN tags or not. See
Section 8.3.1.3
"LAN Configuration
Page - Use VLAN For Management Interface".
Ethernet Auto Mdix: This enables/disables the Auto Medium Dependent Interface (MDI)/Medium
Dependent Interface Crossover (MDIX) capability. Default is "Enabled".
Drop Ethernet Link On Wireless Link Down: When this option is enabled the Ethernet
link is momentarily dropped when the wireless link goes down. This feature is used to indicate to
the connected network equipment that this Ethernet link is no longer available, thus causing STP
(Spanning Tree Protocol) to re-route packets through an alternate link.
70

Advertisement

Table of Contents
loading

Table of Contents