Ending A Call - Cisco 7962G User Manual

If you want to...
Answer a call on your mobile
phone or other remote
destination
Tip
• If parties on a call hear a beep tone, the call may be monitored or recorded. Ask your system
administrator for more information.
• If you work in a contact center or similar environment, you can create, update, and delete your
own prerecorded greeting that plays automatically if Agent Greeting is configured for your phone.
For more information, see your system administrator.
• A Call Chaperone user cannot answer an incoming call while calls are being chaperoned.

Ending a Call

To end a call, hang up. Here are some more details.
If you want to...
Hang up while using the handset
Hang up while using the headset
Hang up while using the speakerphone Press
Hang up one call but preserve another
call on the same line
6
Then...
Set up Mobile Connect and answer
your phone.
When you enable Mobile Connect,
answer the call on your mobile phone,
and have up to four IP Phones or
Softphone configured as shared lines,
the additional phones stop flashing.
Then...
Return the handset to its cradle. Or press EndCall.
Press . Or, to keep headset mode active, press EndCall.
Cisco Unified IP Phones 7962G and 7942G support a
wireless headset. If you are using a wireless headset, refer to
the wireless headset documentation for instructions.
or EndCall.
Press EndCall. If necessary, remove the call from hold first.
For more information, see...
See Managing Business
Calls Using a Single Phone
Number, page 14.
OL-22333-01