Understanding Phone Screen Features - Cisco 7962G User Manual

Understanding Phone Screen Features

The following figure shows how your main phone screen may look with an active call.
7
6
5
4
Primary phone
1
line
Programmable
2
buttons
Softkey labels
3
Status line
4
5 Call activity
area
6 Phone tab
Feature tabs
7
The Messages, Directories, and Services screens on your phone may appear in Normal mode
Note
or in Wide mode depending on how your phone has been set up. A phone window in Wide
mode spans the entire width of the phone screen. However, neither you nor your
administrator can adjust the phone screen viewing mode.
Cisco Unified IP Phone User Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
1
Displays the phone number (directory number) for your primary phone line.
When several feature tabs are open, the phone number and the time and date
display alternately in this area.
Serve as phone line buttons, intercom line buttons, speed-dial buttons, phone
service buttons or phone feature buttons. Icons and labels indicate how these
buttons are configured. For an icon reference, see
Displays a softkey function for the corresponding softkey button
Displays audio mode icons, status information, and prompts.
Displays current calls per line, including caller ID, call duration, and call state
for the highlighted line (standard view). See
page 5, and Viewing Multiple Calls, page
Indicates call activity.
Indicate an open feature menu. See
page 8.
2
3
Understanding Lines and Calls,
9.
Understanding Feature Buttons and Menus,
An Overview of Your Phone
Phone Screen Icons.
.
7