Configuring Fast Dials On The Web - Cisco 7962G User Manual

If you want to...
Assign a line button for
your PAB
Search for a PAB entry
Edit a PAB entry
Delete a PAB entry

Configuring Fast Dials on the Web

This section describes how to assign Fast Dials from your User Options web pages.
If you want to...
Assign a Fast Dial code to
a PAB entry
Cisco Unified IP Phone User Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
Then do this after you log in...
Note Before you can assign a line button for your PAB, your system
administrator must configure the phone to display services. Contact
your system administrator for more information.
1. Choose User Options > Device.
2. Click Service URL.
3. From the Button drop-down list box, choose the Personal Address
Book service.
4. Enter a phone label for the button and then click Save.
5. To refresh the phone configuration, click Reset and then Restart.
You can now press the line button to access the PAB codes.
1. Choose User Options > Personal Address Book.
2. Specify search information and click Find.
1. Search for a PAB entry.
2. Click a name or nickname.
3. Edit the entry as needed and click Save.
1. Search for a PAB entry.
2. Select one or more entries and click Delete Selected.
Then do this after you log in...
1. Create a PAB entry. See
Web, page 2.
2. Choose User Options > Fast Dials.
3. Click Add New.
4. To find the appropriate PAB entry, use the Search Options area.
5. In the Search Results area, click a phone number.
6. Change the Fast Dial code, if desired, and click Save.
Using the User Options Web Pages
Using Your Personal Address Book on the
3