Changing Phone Settings; Customizing Rings And Message Indicators - Cisco 7962G User Manual

Changing Phone Settings

You can personalize your Cisco Unified IP Phone by adjusting the ring tone, background image, and
other settings.

Customizing Rings and Message Indicators

You can customize how your phone indicates an incoming call and a new voice mail message. You can
also adjust the ringer volume for your phone.
If you want to...
Change the ring tone
per line
Adjust the volume level for
the phone ringer
Change the ring pattern per
line (flash-only, ring once,
beep-only, etc.)
Cisco Unified IP Phone User Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
Then...
1. Choose > User Preferences > Rings.
2. Choose a phone line or the default ring setting.
3. Choose a ring tone to play a sample of it.
4. Press Select and Save to set the ring tone, or press Cancel.
Press while the handset is in the cradle and the headset and
speakerphone buttons are off. The new ringer volume is saved
automatically.
Note Check with your system administrator to see if a minimum
ringer-volume setting was configured.
1. Log in to your Cisco Unified CM User Options web pages. (See
Accessing Your User Options Web Pages, page
2. Access your call ring pattern settings. (See
Settings on the Web, page
Note Before you can access this setting, your system administrator may
need to enable it for you.
1.)
Controlling Line
8.)
1