Table of Contents
Advertisement
User's Manual
4.5.9.5
Auto Detect PCI CLK
If you have the EMI issue, set the option as Enabled, it keeps its interference under control.
The choice: Disable, Enable.
4.5.9.6
Spread Spectrum
Using the setting " Enabled ", for EMI testing will increase the system stability. The default
setting is " Disabled ".
The choice: Disable, Enable.
4.5.9.7
CPU Host/3v66/PCI Clock
Choose Default, 100, 103, 105, 107,109,111, 114, 117,120, 127, 130 MHz for the external
frequency of your CPU. You can select Default, 66, 69,70,71,73,74,76,78,80,85,87MHz. if
your CPU is 100Mhz FSB and select Default, 100, 103, 105, 107,109,111,114,117, 120,
127 or 130 MHz if the CPU is 100Mhz FSB.
Warning: Over specification operations are not recommended.
The frequency-mapping table of the elements:
4.5.10
Load Fail-Safe Defaults
This loads the troubleshooting default values permanently stored in the ROM chips. These
settings are not optimal and turn off all high performance features. You should use these
values only if you have hardware problems. Highlight this option in the main menu and
press <Enter>. The message below will appear.
66 ECB-862/862L User's Manual
CPU Host/3V66
100 / 66 MHz
33 MHz
103 / 69 MHz
34 MHz
105 / 70 MHz
35 MHz
107 / 71 MHz
36 MHz
109 / 73 MHz
36 MHz
111 / 74 MHz
37 MHz
114 / 76 MHz
38 MHz
117 / 78 MHz
39 MHz
120 / 80 MHz
40 MHz
127 / 85 MHz
42 MHz
130 / 87 MHz
43 MHz
PCI
Advertisement
Table of Contents
