Intel ECB-862 Series User Manual page 67

User's Manual
4.5.5.8 POWER ON Function
This field allows you to use the keyboard to power-on the system. Use Table 3 to configure
this function.
Item
Password
Hot Key
Any Key
Mouse Left
Mouse Right
Button Only
Keyboard 98
4.5.5.9 Onboard FDC Controller
Select "Enabled" to activate the on-board FDC and "Disabled" to activate an add-on FDC.
The choice: Disable, Enable.
4.5.5.10 Onboard Serial Port 1 & 2
Select an address and corresponding interrupt for the first/second serial port. The default
value for the first serial port is "3F8/IRQ4" and the second serial port is "2F8/IRQ3".
The choice: Disable, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 3F8/IRQ3, and Auto.
4.5.5.11 UART Mode Select
Select to activate the Infrared transfer function.
The choice: IrDA, ASKIR, Normal.
4.5.5.12 RxD , TxD Active
This choice: Hi, Lo; Lo, Hi; Lo, Lo; Hi, Hi.
56 ECB-862/862L User's Manual
Options
Press Enter
Ctrl-F1 to Ctrl-F12
Press Enter
Press Enter
Press Enter
Press Enter
Press Enter
Table4 Power On function selections
When this option is selected, move the cursor to the "KB
Power On Password" field and press <Enter>. Enter your
password. You can enter up to 5 characters. Type in
exactly the same password to confirm, then press
<Enter>.
When this option is selected, move the cursor to the " Hot
Key Power On " field to select a function key you would
like to use to power-on the system. The options are from
Ctrl-F1 to Ctrl-F12.
Press any key to power-on the system,
When this option is selected, double-click the left button of
the mouse to power-on the system.
When this option is selected, double-click the right button
of the mouse to power-on the system.
System can be power on with Power Button.
When this option is selected, press the "wake up" key of
the Windows 98 compatible keyboard to power-on the
system.
Description