AND Weighing Indicator AD-4407 Instruction Manual page 47

key..............The key to register the unit weight and return to the piece
ENTER
Press
ESC
Notes It is preferable to have a large number of samples, to minimize the
counting error.
Press the
If the total weight of the samples is too light and is not adequate to be
used as the unit weight,
to the registration display.
Digital input
When the unit weight is already known, digital input is available.
Step 1 Start with the normal weight mode.
Step 2 Press the
weight unit is displayed with unit pcs
- key..................The key to set the unit weight. Maximum is 5 digits.
0 9
key .....................The key to select the weight unit of the unit weight.
+/-
key................The key to clear the digital input. U---- is displayed.
ZERO
key ..................The key to return to the normal weight display without
ESC
key..............The key to register the unit weight and return to the normal
ENTER
Press the
AD-4407 Weighing Indicator
count display. The unit weight is calculated automatically
with the weight and the number of samples.
key while pressing the
The key to return to the piece count display without changing
the unit weight.
ENTER
key after the stable mark turns on.
key to enter the digital input of the unit weight. U xxx and the
SAMPLE
changing the registered unit weight.
weight display.
key while pressing
MODE
key
+/-
loUt is displayed for 2 seconds and returns loUt loUt loUt
pcs blinking. Using following keys: pcs pcs
key The key to shift the decimal point.
+/-
Page 45
12. Counting Function