Rear Panel Description - AND Weighing Indicator AD-4407 Instruction Manual

9 ESC key
NET/GROSS key The key to select net or gross weight in the display.
+/- key
ENTER key
PRINT key
ON/OFF key
4.1.2.

Rear Panel Description

10
11
No. Name
10 Adjustment knob
11 Power cable
12 CAL switch (cover)
13 Grounding terminal
14 Load cell cable cramp
15 Interface cable cramp
Caution Please confirm that the receptacle type and local voltage is correct for
your indicator (scale).
AD-4407 Weighing Indicator
The key to proceed to the next step without changing the data.
The key to select the sign of a value.
The key to confirm parameters and stores the data.
The key to output data (press quickly).
The key to turn the indicator on and off (OFF: hold for 3 seconds).
12
13
Adjust the viewing angle.
Connect to the AC power source.
CAL switch is located inside the panel.
Connect to earth ground.
Tighten to protect from water and dust.
Tighten to protect from water and dust.
Page 9
14
15
Description
4. Description of panels and symbols