F: Satin Stitch Foot; G: Blind Hem Stitch Foot; C: Overedge Foot; R: Automatic Buttonhole Foot - Kenmore 385.18630 Owner's Manual

Presser Foot Types (continued)
• Satin stitch foot (Foot F)
Use this foot for satin stitch and outlining applique.
For: Darning (page 46)
Satin stitch (page 48)
Monogramming (page 50)
Applique (page 50)
Shell stitch (page 60)
Decorative stitch of geometric patterns (page 64)
Smocking (page 68) ....................................
Twin needle stitches (page 88)
• Blind hem stitch foot (Foot G)
Use this foot for perfect blind hemming and topstitching. The
foot has ridges on the bottom to keep the fabric from slipping
and a screw on top to guide the folded edge of your hem.
For: Blind hem stitch (page 56)
Foot F:
Pie F:
Pied F:
J
Foot G:
Pie G:
Pied G:
, Overedge foot (Foot C)
This foot is specially constructedfor stitching and/or overcasting
seams. The small brush and wire guides help control the fabric,
hold the raw edge in place and keep it from puckering, espe-
cially when sewing on knit fabrics.
For: Overcasting stitch (Page 54)
Serging (page 70)
Foot C:
Pie C:
Pied C:
•-Automatic buttonhole foot (Foot R)
Use this foot for one step automatic buttonholing.
Simply set a button on the guide of this foot and depress the foot
control.
You can sew exactly the same length of buttonhole as the but-
ton.
For: Automatic buttonhole (page 80)
Foot R:
Pie R:
Pied R:
• Quilter
The quilter will help to keep the stitching lines straight.
For: Straight stitching (page 38,40)
Quilter:
Gu[a de acolchado:
Guide & matelasser:
.J
:: ¸¸¸¸5