F: Satin Stitch Foot; C: Overedge Foot; B: Buttonhole Foot (Option); Quilter - Kenmore 385.16774 Owner's Manual

Presser Foot Types (continued)
• Satin stitch foot (Foot F)
Use this foot for satin stitch and outlining applique.
For: Darning
Satin stitch
Monogramming
Applique
Shell stitch
Decorative stitch patterns
Twin needle stitches
Smocking
• Overedge foot (Foot C)
This foot is specially constructed for stitching and/or
overcasting seams. The small brush and wire guides help
control the fabric, hold the raw edge in place and keep it
from puckering, especially when sewing on knit fabrics.
For: Overcasting
Serging
• Buttonhole foot (B) (Option)
Use this foot for manual buttonholing.
It is marked to help you measure your buttonholes
accurately.
For: Manual buttonhole

• Quilter

The quilter helps keep the stitching lines straight.
For: Quilting
• 1/4ý Seam foot
This foot is useful for patchwork quilt. The guide on the
foot maintains an exact 1/4ý (0.7 cm) seam allowance.
For: Using 1/4ý seam foot

• Walking foot

This is special attachment for hard-to-feed materials. This
foot effectively prevents fabrics from shifting and
puckering. It is great for quilting and matching plaids.
For: Using walking foot
(page 48)
Foot F:
(page 50)
Prensatelas F:
(page 52)
Pied F:
(page 52)
(page 62)
(page 64)
(page 66)
(page 70)
Foot C:
Prensatelas C:
Pied C
(Page 56)
(Page 72)
Foot B:
Prensatelas B:
Pied B
(page 84)
Quilter:
(page 40)
Acolchador:
Guide à matelasser:
1/4ý seam foot:
Prensatelas de puntada recta
(page 42)
con 1/4ý guía:
Piqueuse 1/4 Po:
Walking foot:
Prensatelas de doble arrastre:
Pied à niveleur:
(page 42)
14