Table of Contents
Advertisement
Message on the LCD
Paper Mismatch
Set XXX paper
Press Stop
Please Call Service
XXX
Please Replace Drum
Please Replace Toner
Please Supply Paper
Please Wait
Printer In Use
Protect Doc. Stored
Scanner In Use
SecurityRx is Off
Select Paper Size
Sub-Address In Use
Toner Low
Too Many Characters
Too Many Locations
Too Many Steps
In PC printing, the size of paper in the paper cassette does not match up the paper size
you specified by the printer driver. Press <Stop> to cancel a print job. Then load the
correct paper size and try printing the document again.
The printer unit of your machine does not work. Contact your OKI dealer.
Your drum cartridge is not functioning. Your machine cannot print until it is replaced
with a new drum cartridge.
Your toner cartridge is empty. Replace the toner cartridge. Your machine cannot print
until it is replaced with a new toner cartridge.
The paper cassette or bypass tray is out of paper. Supply paper to the cassette and/or
the bypass tray.
Your machine's printer is either warming up or busy. Please wait until the machine is
finished printing and then re-try your command or operation.
The command you are trying to enter requires the use of the printer, which is currently
in use. Wait for the machine to finish printing.
A received document was in your machine's memory when you tried to turn off the
security reception passcode. Print the received document from your machine's memory,
then retry the desired operation.
The command you are trying to enter requires the use of the scanner, which is currently
in use. Wait for the machine to complete the scan, then re-try the desired command.
You tried to turn the security reception on by pressing a soft key assigned to "Security",
but the security reception setting is not set to "On".
To set the security reception setting to on, see page 9-3.
You tried to make a copy in the following conditions:
• Paper size selection is set to "Auto".
• The bypass tray has paper other than A4, A5 or F4.
• Paper cassette is out of paper.
Press <Paper Size /Next Doc.> to select your desired paper.
You tried to enter a subaddress identical to one already used in another F-code box.
Enter a different subaddress.
Your machine is almost out of toner.
Please contact your OKI dealer soon to purchase a new toner cartridge.
You attempted to enter too many numbers or other characters in the current operation.
Press <Cancel> to delete the extra characters, then try again.
You tried to enter too many numbers for a broadcast. You can enter up to 200 autodi-
aler number and up to 30 numbers entered through the numeric keys.
Press <Cancel> to delete the extra numbers.
You tried to enter too many steps in a macro. You can enter up to 60 steps into a macro
key.
M
Description / Solution
& P
AINTENANCE
ROBLEM SOLVING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
12-15
Advertisement
Table of Contents
