Table of Contents
Advertisement
Sending a document using a subaddress and password
1
Switch to the fax mode by pressing <
2
Place the document face up on the automatic document feeder (ADF).
Adjust the document mode and contrast if necessary.
3
Press <Advanced functions> until "F-Code Tx" appears on the LCD then press
<Enter>.
F-Code Tx
– or –
Press the <F-Code Tx> soft key.
Enter Sub-Address
_
4
Use the numeric keys to enter the appropriate ITU-T subaddress.
Then press <Enter>.
Enter Password
_
The password setting is optional, but required if the other party has set a password on
their F-code box.
5
Use the numeric keys to enter the ITU-T password.
Then press <Enter>.
If you do not need to enter ITU-T password, press <Enter> without entering any
number.
Enter Fax Number
_
6
Enter the fax number.
You may use a one-touch key, speed-dial number or the numeric keys to enter the fax
number.
7
Press <Start>. Your machine begins scanning the document.
Then, your machine dials and sends the document with the subaddress and password.
To cancel the sending in progress, press <Fax Cancel>, <Cancel>, and <Cancel>.
To cancel the delayed sending, press <Fax Cancel>, search the command number you
want to cancel using the cursor key, then press <Cancel>, and <Cancel>. (See also
"Reviewing or canceling command" on page 4-7.)
NOTE
• If you frequently dial the same destination with a subaddress (and password), use the
macro key at your convenience. For details of the macro key, see page 8-4.
COPY FAX SCAN
/ /Enter
>.
U
F-
SING
CODE FEATURES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
6-11
Advertisement
Table of Contents
