Table of Contents
Advertisement
Fax settings
The fax settings allow you to customize various fax settings to match your needs.
Accessing the fax settings
1
Press <Menu>, <2>, <2>.
[Program]
2 Fax Settings
2
Press <Enter>.
[Program]
01 Scan Parameters
Use < q > or <p> to search the item you want to set or change and press <Enter>.
3
4
Change settings and press <Enter>. For details of each setting, refer to the table
below:
5
When you have finished, press <Reset> to return to the standby mode.
The underlined settings are factory defaults.
01 Scan Parameters
02 Print Parameters Rx Reduc. Rate (Refer to the page 5-6.)
03 # of Rings
04 Redial
05 Dialing Pause
No.22_
No.2201
Resolution
You can choose one of the following.
Normal
Fine
S-Fine
Gray
Contrast
You can choose one of the following.
Normal, Dark, Darkest, Light or Lightest.
S-Fine Resol.
You can choose one of the following.
400dpi, 600dpi
Auto
100%
Margin Sets the reduction margin for Auto reduction. (00 to 85 mm)
24 mm
Half Page Recpt.
Off
On
Sets the number of rings before your machine answers.
# of Rings
03 times (03 to 10 rings)
Sets the number of times and interval for automatic fax redialing.
# of Redials
2 times (0 to 10 times)
Redial Interval 1 minute (0 to 5 min.)
Sets the dialing pause length.
02 sec. (00 to 10 sec.)
Scans at 8 dots/mm × 3.85 lines/mm.
Scans at 8 dots/mm × 7.7 lines/mm.
Scans at 8 dots/mm × 15.4 lines/mm.
Scans at 8 dots/mm × 7.7 lines/mm.
Automatically reduces printouts at variable
rates down to a minimum of 50%. Tries to
reduce printout to fit on one sheet of your
selected paper size. If it can't, prints the
received document at 100% size on two or more
pages.
Does not reduce the received documents.
Will not combine the half-page receptions.
Combines two of half-page receptions onto a
single sheet.
U
10-5
SER SETTINGS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
Advertisement
Table of Contents
