Before copying
Document and paper handling
Before you begin making copies, please read the information mentioned on pages 2-10 to
2-16.
Changing your machine to the Copy mode
Press the <
Display in the copy standby mode
Press <
COPY FAX SCAN
When the machine is in the copy mode, the machine shows:
Copy Ready
Auto
To change the settings, refer to "Basic copy settings" on page 7-4.
Memory overflow message
If you have stored too much information in your machine's memory, a "Memory Over-
flow" message will appear on the LCD:
Start Or Cancel
This appears because (1) too many pages have been stored in the memory, or (2) the
stored pages have too much information for your machine to remember.
If this message appears, press <Start> to tell your machine to copy as many pages into
memory, or press <Cancel> to delete the current job from memory (but not previous
operations).
NOTE
If the machine is idle for 3 minutes it will automatically print the document stored in
the memory during the current operation.
7-2
C
OPYING
> key until the "COPY" light glows.
COPY FAX SCAN
> to change the machine to the copy mode.
01
A4
100%