Table of Contents
Advertisement
Maintenance
Cleaning tips
Some things to keep in mind about cleaning your machine:
• Do clean it! Dust and dirt, especially around the fax machine's air vents can shorten
your machine's life.
• Always unplug the machine before you clean it.
• Never spray any cleaner directly onto your machine. The drifting spray could
damage components inside.
• Never try to clean sealed areas inside your machine. They are sealed for both
your safety and the safety of your machine.
• For cleaning the machine's exterior, use a mild cleaning solution sprayed onto a lint-
free cloth.
• In areas you cannot reach with swabs, always use dry, dust-free compressed air to
gently blow away dust and other material.
Cleaning the scanning area
1
Wipe the ADF glass with a clean, soft, lint-free cloth moistened with water.
2
Then wipe it with a clean, soft, dry, lint-free cloth until it is clean and dry.
Cleaning the ADF rollers
If you are having trouble with getting your documents to feed properly, try this procedure:
1
Turn off the power and disconnect the power cable from the wall outlet.
2
Open the ADF cover.
3
Use a cloth moistened with a rubber roller cleaner to clean the face of the rollers.
Rotate the rollers by hand to allow cleaning of the entire roller surface.
12-2 M
AINTENANCE
ADF glass
& P
ROBLEM SOLVING
Advertisement
Table of Contents
