Selecting A Function - Oki OKIFAX F-305 User Manual

Selecting a function

To start setting a function, you must first press <Menu>.
The two ways of selecting a function are described below.
The procedures described in this manual are using short-cut operations.
Short-cut operation with the numeric keys
Press <Enter>, then press a three- or four-digit numbers to select the function.
For example, "Press <Menu>, <2>, <1>, <0>, <1>, <Enter>"...
Searching for a function using the cursor key
Even if you don't remember the exact commands needed for an operation, you can search
for and enter the function using the cursor key (< q >, < p >, < t >, < u >).
To search for a function:
1
Press <Menu>.
2 Search for the function using < q >, < p >, < t >, or < u >.
The function table on the next page may be useful for your search.
For example, if you want to set the "Cassette Size," press
3
Press <Enter> when you have found the function that you want to set.
Going back to the previous screen by pressing <Back>
Press <Back> to go back to the previous menu level.
2-4 G
ETTING STARTED
... you would press
... then
... then
... then
... then
... then
<Menu>
<2>
<1>
<0> (the numeric key zero)
<1>
<Enter>
< q >, < u >, < u >.