Table of Contents
Advertisement
05.Energy Save
Set the machine to conserve power when not in use.
Mode
On
Off
NOTE
• The idle time can be changed in the "Initial setting" mode (see pages 1-12 to
1-14.)
• While the machine is in the energy save mode, the machine shows "Energy
Save Mode" on the LCD, but all the lights on the control panel and scanner
lamp will not be off.
06.Fax & Copy
Make a copy of your document each time it is transmitted. (See page 4-18.)
07.Primary Mode The machine returns to the primary mode when the standby status continues
for longer than 3 minutes after finishing the sending or printing jobs. With this
setting, the machine always starts up in the primary mode.
In default settings, the copy mode is set for the primary mode. However, you
can change the primary mode to the fax mode or to the scan mode.
08.Service Mode
For technical support. Do NOT turn this setting to "On" without an author-
ized technician's advice.
09.Date & Time
Enter the current date and time using 24-hour format.
10.Paper Source
Set the usage rules for the paper cassettes and bypass tray.
Cassette1
Cassette2
Bypass tray
NOTE
• The "Cassette2" appears only when the optional second cassette has been
installed.
• For details of PC printing, refer to the PDF manual on the GDI Printer / Scan-
ner Driver CD supplied with the machine.
11.Page Counter
You can confirm the total number of printed and scanned page.
(See page 8-8.)
The machine saves power consumption after the specified idle
time elapses.
Cancel the energy save mode.
You can choose one of the following for cassette 1.
Fax/Copy
It is used for fax printing, list printing and copying.
Not Used
Cassette 1 is not used for faxing and copying.
It can be used for the separator page function (page
5-14) or PC printing.
Fax
It is used only for fax printing and list printing.
Copy
It is used only for copying.
You can choose one of the following for cassette 2.
Fax/Copy
It is used for fax printing, list printing and copying.
Not Used
Cassette 2 is not used for faxing and copying.
It can be used for the separator page function (page
5-14) or PC printing.
Fax
It is used only for fax printing and list printing.
Copy
It is used only for copying.
You can choose one of the following for Bypass tray.
Fax/Copy
It is used for fax printing, list printing and copying.
Not Used
Bypass tray is not used for faxing and copying.
It can be used for the separator page function (page
5-14) or PC printing.
Fax
It is used only for fax printing and list printing.
Copy
It is used only for copying.
U
10-3
SER SETTINGS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
Advertisement
Table of Contents
