Table of Contents
Advertisement
Altos R520 Installation Configuration Guide
IOAT Driver Installation
For Base System Device, it should be the onboard IOAT device. You could
1.
find the driver in EasyBUILD.
Right-click on the Base System Device and select Update Driver.
2.
Select No, not this time. Do not connect to Windows Update to search the
3.
driver.
Select Install from a list or specific location (Advanced).
4.
Select Search the best driver these locations and check Include this
5.
location in the search.
Click on Browse and specify the path for the driver.
6.
Click on Next and follow the instruction to finish the driver update.
7.
After installing the driver, you would see Intel(R) 5000 Series Chipsets
8.
Integrated Device – 1A38 listed in System devices.
Hot-swap Backplane Driver Installation
There is a ESG-SHV SCA HSBP M11.... SCSI Enclosure Device listed under
1.
Other device in Windows Device Manager. It is the hot-swap SAS
backplane for R520.
Right-click on the ESG-SHV SCA HSBP M11.... SCSI Enclosure Device and
2.
select Update Driver.
Select No, not this time. Do not connect to Windows Update to search the
3.
driver.
Select Install from a list or specific location (Advanced).
4.
Select Search the best driver these locations and check Include this
5.
location in the search.
Click on Browse and specify the path for the driver.
6.
Click on Next and follow the instruction to finish the driver update.
7.
After installing the driver, you would see Intel (r) SCA Hotswap Backplane
8.
listed in System devices.
VGA Driver Installation
Windows will treat onboard VGA as Standard VGA device. You can find
1.
the ATI ES1000 driver in EasyBUILD. Please insert the EasyBUILD into the
optical drive.
Expand Drivers -> Altos R520 -> Graphics adapters -> ATI ES1000, select
2.
Windows Server 2003 and click on Setup.
Follow the instruction to install the VGA driver and reboot the server
3.
after the driver is installed.
52
Advertisement
Table of Contents
