Table of Contents
Advertisement
select Properties.
Select Driver tab and click on Update Driver.
3.
Follow the instructions. Select Search for a suitable driver for my device
4.
(Recommended) and click on Next.
Check on the Specify a location and click on Next to specify the path for
5.
the driver.
Follow the instruction to finish the driver update.
6.
After installing the driver, you would see Intel (r) SCA Hotswap Backplane
7.
listed in System devices.
VGA Driver Installation
There is a VGA controller (VGA Compatible) listed under Other devices in
1.
Windows Device Manager. It is the ATI ES1000 for R520.
Insert the EasyBUILD into the optical drive.
2.
Expand Drivers -> Altos R520 -> Graphics adapters -> ATI ES1000 and
3.
double-click on Windows 2000.
Follow the instruction to install the VGA driver and reboot the server
4.
after the driver is installed.
After installing the driver, you would see ATI ES1000 listed in Display
5.
adapters.
RAID Utility Installation
Please insert the EasyBUILD into the optical drive.
1.
Expand Utilities -> Altos R520 -> Integrated SAS Hareware RAID, select
2.
RAID Web Console 2 (Windows) and click on Setup.
Follow the instruction and use the default setting to complete the RAID
3.
Utility Installation.
Network Utility Installation
Please insert the EasyBUILD into the optical drive.
1.
Expand Utilities -> Altos R520 -> Intel Gigabit Ethernet Controller/Intel
2.
PRO/1000 Network Adapter, select PROSet Utility (Windows 2000) and
click on Setup.
Follow the instruction and use the default setting to complete the
3.
Network Utility Installation.
Windows 2000 Advanced Server SP4 Installation (with
integrated SAS SW RAID)
Below information describes how to manually install Microsoft Windows 2000
67
Altos R520 Installation Configuration Guide
Advertisement
Table of Contents
