Follow the instruction and use the default setting to complete the RAID
3.
Utility Installation.
Network Utility Installation
Please insert the EasyBUILD into the optical drive.
1.
Expand Utilities -> Altos R520 -> Intel Gigabit Ethernet Controller/Intel
2.
PRO/1000 Network Adapter, select PROSet Utility (Windows Server 2003)
and click on Setup.
Follow the instruction and use the default setting to complete the
3.
Network Utility Installation.
Windows Server 2003 Enterprise Edition SP1 Installation (with
onboard SATA RAID)
Below information describes how to manually install Windows Server 2003
Enterprise Edition on Altos R520.
Drivers Required
For Windows Server 2003 Installation, the following device drivers are required.
Device
onboard SATA RAID
Onboard Chipset
Onboard Gigabit
Ethernet
Onboard VGA
Onboard USB 2.0
IOAT
Software Required
The management utility of onboard SATA RAID can be found in the EasyBUILD.
Software
Microsoft Scalable
Networking Pack
RAID Web Console
2
Intel PROSet Utility
Configuring onboard SATA RAID
Please refer to the Appendix C. for the onboard SATA RAID configuration.
57
Version
04.24.0620.20
EasyBUILD 7.1 build 400 (or later)
06
7.4.0.1005
EasyBUILD 7.1 build 400 (or later)
9.3.39.0
EasyBUILD 7.1 build 400 (or later)
8.24.3.0
EasyBUILD 7.1 build 400 (or later)
N/A
OS built-in
1.2.52.0
EasyBUILD 7.1 build 400 (or later)
Version
http://www.microsoft.com/downloads/
details.aspx?FamilyID=c65f4a89-f4da-
N/A
463e-a496-
4b5abd660bf9&DisplayLang=en
1.13-07
EasyBUILD 7.1 build 400 (or later)
10.4.4.2
EasyBUILD 7.1 build 400 (or later)
Altos R520 Installation Configuration Guide
EasyBUILD Version
EasyBUILD Version