Altos R520 Installation Configuration Guide
Onboard VGA
Onboard USB 2.0
IOAT
Hot-swap
backplane
Software Required
The management utility of integrated SAS hardware RAID 2 can be found in
the EasyBUILD.
Software
Microsoft Scalable
Networking Pack
RAID Web Console
2
Intel PROSet Utility
Configuring integrated SAS hardware RAID 2
Please refer to the APPENDIX D. for the integrated SAS hardware RAID 2
configuration.
Installation Tips
NOTE. There is no built-in driver of Integrated SAS hardware RAID 2 in the
Windows Server 2003. You need an external USB floppy drive to load driver
during the OS installation.
As Windows Server 2003 can't recognize the integrated SAS hardware
1.
RAID 2, you need to make a driver diskette from the EasyBUILD first
before the installation.
Press F6 at the start of installation to provide the driver disk for the
2.
integrated SAS hardware RAID 2.
Select "Intel(R) SAS RAID Controller Driver (Server 2003 32-bit)" as target
3.
driver
After loading the RAID driver from diskette, follow the normal procedure
4.
to finish the installation.
Chipset Driver Installation
After the installation completes, you would see the following devices
1.
with yellow mark in Device Manager.
50
8.24.3-
060405a-
EasyBUILD 8.0 build 200 (or later)
038923C-Intel
N/A
OS built-in
1.2.79.9
EasyBUILD 8.0 build 200 (or later)
5.0.6262.1
EasyBUILD 8.0 build 200 (or later)
Version
http://www.microsoft.com/downloads/
details.aspx?FamilyID=c65f4a89-f4da-
N/A
463e-a496-
4b5abd660bf9&DisplayLang=en
2.63
EasyBUILD 8.0 build 200 (or later)
13.0.44.0
EasyBUILD 8.0 build 200 (or later)
EasyBUILD Version