Table of Contents
Advertisement
Altos R520 Installation Configuration Guide
Onboard USB 2.0
Software Required
The management utility of integrated SAS hardware RAID can be found in the
EasyBUILD.
Software
RAID Web Console
2
Configuring integrated SAS hardware RAID
Please refer to the Appendix A. for the integrated SAS hardware RAID
configuration.
Installation Tips
NOTE. There is no built-in driver Integrated SAS hardware RAID in the SUSE
Linux Enterprise Server 9 Service Pack 3. You need an external USB floppy drive
to load driver during the OS installation.
NOTE. Before the installation, please disable the "Intel Speedstep technology"
setting. You can find the option in BIOS setting -> Advanced -> Processor
configuration -> Enhanced Intel Speedstep technology.
Since SUSE Linux Enterprise Server 9 Service Pack 3 cannot recognize the
1.
integrated SAS hardware RAID, you need to make a driver diskette from
the EasyBUILD first before the installation.
Boot the system form SUSE Linux Enterprise Server 9 Service Pack3
2.
bootable CD.
When you see the boot menu on the screen, select Installation, press F6
3.
then press Enter to continue.
Follow the instruction to load the integrated SAS hardware RAID driver
4.
from the driver diskette.
Follow the instruction to change the CD to SUSE Linux Enterprise Server 9
5.
CD #1.
At the Installation Settings, select the Software and click on Detailed
6.
selection to add kernel-source and C/C++ Compiler and Tools to install.
To add C/C++ compiler tools, please check C/C++ Compiler and Tools in
7.
the left window.
To add kernel-source, please select Various Linux Tools in the left window
8.
and check kernel-source in the right window.
After you add the kernel-source and C/C++ Compiler and Tools, please
9.
click on Accept and follow the instruction to complete the installation.
148
N/A
OS built-in
Version
EasyBUILD Version
1.13-07
EasyBUILD 7.1 build 400 (or later)
Advertisement
Table of Contents
