Table of Contents
Advertisement
VGA Driver Installation
Windows will treat onboard VGA as Standard VGA device. You can find
1.
the ATI ES1000 driver in EasyBUILD. Please insert the EasyBUILD into the
optical drive.
Expand Drivers -> Altos R520 -> Graphics adapters -> ATI ES1000, select
2.
Windows Server 2008 x64 and click on Setup.
Follow the instruction to install the VGA driver and reboot the server
3.
after the driver is installed.
RAID Utility Installation
Please insert the EasyBUILD into the optical drive.
1.
Expand Utilities -> Altos R520 -> Integrated SAS SW RAID, select RAID
2.
Web Console 2 (Windows) and click on Setup.
Follow the instruction and use the default setting to complete the RAID
3.
Utility Installation.
Network Utility Installation
The PROSet utility for the onboard Gigabit Ethernet controller will be installed
automatically when you installing the onboard Gigabit Ethernet driver.
Windows Server 2008 Enterprise x64 Edition Installation (with
onboard SATA RAID)
Below information describes how to manually install Windows Server 2008
Enterprise x64 Edition on Altos R520.
BIOS Required
Altos R520 BIOS
(or later), BMC
P88
required to support Windows Server 2008.
Drivers Required
For Windows Server 2008 x64 Installation, the following device drivers are
required.
Device
onboard SATA RAID
Onboard Chipset
Onboard Gigabit
Ethernet
Onboard VGA
Onboard USB 2.0
IOAT
15
(or later) and FRUSDR
63
Version
09.32.0207.20
EasyBUILD 8.0 build 200 (or later)
08
8.6.0.1002
EasyBUILD 8.0 build 200 (or later)
9.12.17.0
EasyBUILD 8.0 build 200 (or later)
8.240.50.3000
EasyBUILD 8.0 build 200 (or later)
N/A
OS built-in
1.2.79.9
EasyBUILD 8.0 build 200 (or later)
Altos R520 Installation Configuration Guide
(or later) are
47
EasyBUILD Version
Advertisement
Table of Contents
