Gigabit Ethernet Driver Installation
There are two Ethernet Controller listed under Other device in Windows
1.
Device Manager. It should be the onboard Intel 82563EB Gigabit Ethernet
controller. You could find the driver in EasyBUILD. Please do the same on
both of the devices.
Right-click on the Ethernet Controller and select Update Driver.
2.
Select No, not this time. Do not connect to Windows Update to search the
3.
driver.
Select Install from a list or specific location (Advanced).
4.
Select Search the best driver these locations and check Include this
5.
location in the search.
Click on Browse and specify the path for the driver.
6.
Click on Next and follow the instruction to finish the driver update.
7.
After installing the driver, you would see Intel(R) PRO/1000 EB Network
8.
Connection with I/O Acceleration listed in Network adapters.
IOAT Driver Installation
For Base System Device, it should be the onboard IOAT device. You could
1.
find the driver in EasyBUILD.
Right-click on the Base System Device and select Update Driver.
2.
Select No, not this time. Do not connect to Windows Update to search the
3.
driver.
Select Install from a list or specific location (Advanced).
4.
Select Search the best driver these locations and check Include this
5.
location in the search.
Click on Browse and specify the path for the driver.
6.
Click on Next and follow the instruction to finish the driver update.
7.
After installing the driver, you would see Intel(R) 5000 Series Chipsets
8.
Integrated Device – 1A38 listed in System devices.
VGA Driver Installation
Windows will treat onboard VGA as Standard VGA device. You can find
1.
the ATI ES1000 driver in EasyBUILD. Please insert the EasyBUILD into the
optical drive.
Expand Drivers -> Altos R520 -> Graphics adapters -> ATI ES1000, select
2.
Windows Server 2003 and click on Setup.
Follow the instruction to install the VGA driver and reboot the server
3.
after the driver is installed.
59
Altos R520 Installation Configuration Guide