Table of Contents
Advertisement
Altos R520 Installation Configuration Guide
hardware RAID
Onboard Chipset
Onboard Gigabit
Ethernet
Onboard VGA
Onboard USB 2.0
IOAT
Hot-swap
backplane
Software Required
The management utility of integrated SAS hardware RAID can be found in the
EasyBUILD.
Software
Microsoft Scalable
Networking Pack
RAID Web Console
2
Intel PROSet Utility
Configuring integrated SAS hardware RAID
Please refer to the Appendix A. for the integrated SAS hardware RAID
configuration.
Installation Tips
NOTE. There is no built-in driver of Integrated SAS hardware RAID in the
Windows Server 2003. You need an external USB floppy drive to load driver
during the OS installation.
As Windows Server 2003 can't recognize the integrated SAS hardware
4.
RAID, you need to make a driver diskette from the EasyBUILD first before
the installation.
Press F6 at the start of installation to provide the driver disk for the
5.
integrated SAS hardware RAID.
Select "Intel(R) SAS RAID Controller Driver (Server 2003 32-bit)" as target
6.
driver
After loading the RAID driver from diskette, follow the normal procedure
7.
to finish the installation.
Chipset Driver Installation
After the installation completes, you would see the following devices
1.
with yellow mark in Device Manager.
46
7.4.0.1005
EasyBUILD 7.1 build 400 (or later)
9.3.39.0
EasyBUILD 7.1 build 400 (or later)
8.24.3.0
EasyBUILD 7.1 build 400 (or later)
N/A
OS built-in
1.2.52.0
EasyBUILD 7.1 build 400 (or later)
5.0.6055.2
EasyBUILD 7.1 build 400 (or later)
Version
http://www.microsoft.com/downloads/
details.aspx?FamilyID=c65f4a89-f4da-
N/A
463e-a496-
4b5abd660bf9&DisplayLang=en
1.13-07
EasyBUILD 7.1 build 400 (or later)
10.4.4.2
EasyBUILD 7.1 build 400 (or later)
EasyBUILD Version
Advertisement
Table of Contents
