Table of Contents
Advertisement
To start RAID Web Console 2, click on start button, select System -> More
4.
Programs -> RAID Web Console 2 Startup UI
SUSE Linux Enterprise Server 10 Installation (with integrated
SAS SW RAID)
Below information describes how to manually install SUSE Linux Enterprise
Server 10 on Altos R520 with integrated SAS SW RAID.
Drivers Required
For SUSE Linux Enterprise Server 10 Installation, the following device drivers are
required.
Device
Integrated SAS SW
RAID
Onboard Chipset
Onboard Gigabit
Ethernet
Onboard VGA
IOAT
Onboard USB 2.0
Software Required
The management utility of integrated SAS SW RAID can be found in the
EasyBUILD 7.1 build 600 (or later).
Software
RAID Web Console
2
Configuring integrated SAS SW RAID
Please refer to the Appendix B. for the integrated SAS SW RAID configuration.
Installation Tips
NOTE. The driver of Integrated SAS SW RAID is required for the SUSE Linux
Enterprise Server 10 EM64T installation. Please install an external USB floppy
drive for applying driver during the OS installation.
Since SUSE Linux Enterprise Server 10 cannot recognize the integrated
1.
SAS SW RAID, you need to make a driver diskette from the EasyBUILD 7.1
build 600 first before the installation.
Boot the system with SUSE Linux Enterprise Server 10 CD #1.
2.
When you see the boot menu on the screen, select Installation and type
3.
"brokenmodules=ahci" string in the below text tab. Then press F5 and
select YES for the driver loading in the installation. Press Enter to
141
Version
06.28.1110.20
EasyBUILD 7.1 build 600 (or later)
06
N/A
OS built-in
7.3.15-NAPI
EasyBUILD 7.1 build 600 (or later)
N/A
OS built-in
2.15
EasyBUILD 8.0 build 200 (or later)
N/A
OS built-in
Version
1.19-00
EasyBUILD 7.1 build 600 (or later)
Altos R520 Installation Configuration Guide
EasyBUILD Version
EasyBUILD Version
Advertisement
Table of Contents
