Table of Contents
Advertisement
Altos R520 Installation Configuration Guide
# unzip ir3_Linux_RWC2_v1.13-00.zip
# chmod 755 install.sh
# chmod 755 RunRPM.sh
# ./install.sh
Type y to accept the license agreement and select 1 for full installation.
3.
To start RAID Web Console 2 on, select applications -> System Tools ->
4.
RAID Web Console 2 Startup UI
Red Hat Enterprise Linux 4.0 EM64T Update 3 Installation (with
integrated SAS hardware RAID 2)
Below information describes how to manually install Red Hat Enterprise Linux
4.0 EM64T Update 3 on Altos R520 with integrated SAS hardware RAID 2.
Drivers Required
For Red Hat Enterprise Linux 4.0 Update 3 Installation, the following device
drivers are required.
Device
Integrated SAS
hardware RAID 2
Onboard Chipset
Onboard Gigabit
Ethernet
Onboard VGA
Onboard USB 2.0
Software Required
The management utility of integrated SAS hardware RAID 2 can be found in
the EasyBUILD.
Software
RAID Web Console
2
Configuring integrated SAS hardware RAID 2
Please refer to the APPENDIX D. for the integrated SAS hardware RAID 2
configuration.
Installation Tips
NOTE. There is no built-in driver Integrated SAS hardware RAID 2 in the Red
Hat Enterprise Linux 4.0 EM64T Update2. You need an external USB floppy
drive to load driver during the OS installation.
Since Red Hat Enterprise Linux 4.0 EM64T Update2 cannot recognize the
1.
98
Version
00.00.03.18
EasyBUILD 8.0 build 200 (or later)
N/A
OS built-in
0.3.3.3
EasyBUILD 8.0 build 200 (or later)
N/A
OS built-in
N/A
OS built-in
Version
2.63
EasyBUILD 8.0 build 200 (or later)
EasyBUILD Version
EasyBUILD Version
Advertisement
Table of Contents
