Installing A Dummy Module; Completing The Task - Fujitsu PRIMERGY RX900 S1 Maintenance Manual

5.3.4

Installing a dummy module

I
Dummy modules protect free bays against environmental impact.
Figure 17: Installing a dummy module in a PSU bay
Ê Press the two plastic clips together as indicated by the arrows and install the
dummy module.
5.3.5

Completing the task

Ê Perform the following procedures to complete the task:
1. Close the rear door of the rack, see
RX900 S1
"Closing the rack door" on page 51
Maintenance Manual
Power supply
61