Required Tools; Starting The Task - Fujitsu PRIMERGY RX900 S1 Maintenance Manual

8.8.1

Required tools

Starting and completing the task:
– key for the rack doors (if applicable)
– Phillips Ph2 screw driver
Removing the expansion card: tool-less
8.8.2

Starting the task

Ê Perform the following procedures:
1. "Opening the rack door" on page 40
2. "Shutting down the server" on page 41
3. "Sliding the server out of the rack" on page 42
4. "Removing the rear cover" on page 46
RX900 S1
Maintenance Manual
Expansion cards and BBU
153