Table of Contents
Advertisement
Expansion cards and BBU
8.7.7
Completing the task
Ê Perform the following procedures to complete the task:
1.
"Installing the rear cover" on page 48
2.
"Mounting the server in the rack" on page 49
3.
"Bringing the server back to operation" on page 51
4.
"Closing the rack door" on page 51
8.8
Removing a non-hot-plug expansion card
Authorized personnel
Authorized specialist personnel can carry out replacement tasks for
integral server components. Ask you local Fujitsu service center for
more detailed information.
V
CAUTION!
Procedures indicated as "Authorized personnel only" must be
done by Fujitsu service personnel or technicians trained by
Fujitsu for doing these tasks. Please note that unauthorized
interference with the system will void the warranty and exempt the
manufacturer from all liability.
V
CAUTION!
Before installing/removing expansion cards to/from the server, turn
off the server, all peripheral devices, and any other connected
devices. Also unplug all power cables from the power outlet. Failure
to do so can cause electric shock.
The circuit boards and soldered parts of internal options are exposed
and can be damaged by static electricity. Before handling them, first
touch a metal part on the server to discharge static electricity from
your body.
Do not touch the circuitry on boards and soldered parts. Hold the
metallic areas or the edge of the circuit boards.
Follow the safety instructions in the
152
"Safety instructions" on page
Maintenance Manual
31.
RX900 S1
Advertisement
Table of Contents
