Table of Contents
Advertisement
Cables
15.1.8 Inserting the fan cage
Figure 191: Inserting the fan cage
Ê Insert the fan cage in the bay (1).
Ê Fasten the captive screws (2).
15.1.9 Completing the task
Ê Perform the following procedures to complete the task:
1. Install the PCI Riser, see
2. Install all expansion cards and dummy modules in PCIe slots #8 to #17,
see
"Expansion cards and BBU" on page 105
I
Make sure that you reinstall each card in the slots it was located
before the replacement.
3. Install all CPUMEMRs, see
I
Make sure that you reinstall each CPUMEMR in the slot it was
located before the replacement.
300
"Expansion cards and BBU" on page 105
"Removing the CPUMEMR" on page 190
Maintenance Manual
RX900 S1
Advertisement
Table of Contents
