Completing The Task - Fujitsu PRIMERGY RX900 S1 Maintenance Manual

Figure 154: Connecting the chassis ID board cable
Ê Connect the chassis ID board cable (1).
Ê Slide the local service display inward until it clicks into place (2).

13.1.5 Completing the task

Ê Perform the following procedures to complete the task:
1. "Inserting the CPUMEMR in the slot" on page 186
2. "Closing the server" on page 47
3. "Mounting the server in the rack" on page 49
4. "Bringing the server back to operation" on page 51
5. "Closing the rack door" on page 51
RX900 S1
Management and diagnostics modules
Maintenance Manual 251