Required Tools; Starting The Task - Fujitsu PRIMERGY RX900 S1 Maintenance Manual

Optical and backup drives
V
CAUTION!
When forcing an accessible drive into a server, be careful so as not
to pinch the cable etc. connected to an accessible drive.
Follow the safety instructions in the

11.1.1 Required tools

Starting and completing the task:
– key for the rack doors (if applicable)
– Phillips Ph2 screw driver
Replacing the optical drive:
– Phillips Ph0 screw driver

11.1.2 Starting the task

Ê Perform the following procedures:
1. "Opening the rack door" on page 40
2. "Shutting down the server" on page 41
3. "Sliding the server out of the rack" on page 42
4. "Opening the server" on page 44
222
"Safety instructions" on page
Maintenance Manual
31.
RX900 S1