Installing The Rear Cover - Fujitsu PRIMERGY RX900 S1 Maintenance Manual

Basic procedures
Ê Place the front cover onto the server such that there is approximately 1 cm
distance to the front.
Ê Push the front cover as far as possible in the direction of the arrow.
Ê Fasten the captive screw on the cover (see circle).
4.6.2

Installing the rear cover

Figure 9: Installing the rear cover
Ê Place the rear cover onto the server such that it projects approximately 1 cm
at the back.
Ê Push the rear cover as far as possible in the direction of the arrow.
Ê Fasten the captive screws on the cover (see circles).
48 Maintenance Manual
RX900 S1