Fuser Ass'y - Dell 1815 Mono Laser Service Manual

Precautions

5.5 Fuser Ass'y

1. Before you remove the Fuser Ass'y, you should
remove:
- Rear Cover (Refer to 5.4)
2. Remove the four screws securing the Fuser Ass'y and
then pull the Fuser Ass'y.
3. Release the CON Harness and REC Harness from
the Thermostat and then remove the three screws
securing the Thermostat and remove it.
REC Harness
Service Manual
5-6
Fuser Ass'y
Thermostat
CON Harness
4. To remove the Halogen Lamp, first release REC
Harness from the left side of the Halogen Lamp and
then release the CON Harness from the right side of
the Halogen Lamp, as shown below.
REC Harness
5. Remove the two screws securing the both side of the
Halogen Lamp and then release in the direction of
arrow, as shown below.
Halogen Lamp
CON Harness