Precautions
5.19 HVPS Housing
1. Before you remove the HVPS Housing, you should
remove:
- Duplex Drive Ass'y (Refer to 5.12)
- Pick Up Roller Ass'y (Refer to 5.17)
- Duplex Guide Housing (Refer to 5.18)
- Unplug the two Connectors (HVPS) (p5-22)
2. Remove the eight screws securing the HVPS
Housing, as shown below.
3. Unplug the connector for connection PBA & SMPS
first. Unplug the other connectors.
Engine
Duplex Guide
Housing
Service Manual
5-28
HVPS Housing
Duplex Motor
Connection PBA
& SMPS
4. If necessary, remove the three screws securing the
HVPS and remove it.
HVPS
Insulator
Sheet
Shield