Duplex Guide Housing (With Feed Roller) - Dell 1815 Mono Laser Service Manual

5.18 Duplex Guide Housing (With Feed Roller)

1. Before you remove the Duplex Guide Housing, you
should remove:
- Pick Up Roller Ass'y (Refer to 5.17)
2. Remove the two screws securing the Duplex Guide
Housing.
Duplex Guide Housing
3. Unplug the one connector (Photo Interrupter) and
remove the Duplex Guide Housing (with Feed Roller),
as shown below.
Photo Interrupter
Connector
Duplex Guide Housing
4. Pull the Feed Roller from the Bushing.
Feed Roller
Precautions
Bushing
Service Manual
5-27