Dell 1815 Mono Laser Service Manual page 109

Service manual
Hide thumbs Also See for 1815 Mono Laser:
Table of Contents

Advertisement

Troubleshooting
7.3.14 Stains on back of the page
The back of the page is stained at 47.1 mm intervals.
• Description
Digital
Digital Pri
Digital Printer
Digital Printer
Digital Printer
7.3.15 Blank Page Print out (1)
Blank page is printed.
• Description
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
7.3.16 Blank Page Print out (2)
1. Blank page is printed.
2. One or several blank pages are printed.
• Description
3. When the printer turns on, several blank pages print.
Service Manual
7-16
Check and Cause
1. Transfer roller is contaminated.
2. Pressure roller is contaminated.
Check and Cause
Bad ground contacts in OPC and/or devel -
oper.
Check and Cause
1. Bad ground contacts in OPC and/or
developer.
2. Abnormal solenoid.
Solution
1. Perform the OPC Cleaning Mode Print 2 or
3 times. Run Self-Test to remove the conta-
mination of the transfer roller.
2. Replace the transfer roller if contaminated
severely.
3. Disassemble the fuser and clean the
H/R(Heat Roller) and P/R(Pressure roller).
And check the area between H/R and
Thermistor. If contaminated, clean the area
is should not be deformed.
Solution
Remove contamination of the terminals of the
toner cartridge and the printer.
Solution
1. Remove contamination of the terminals of
the toner cartridge.
2. Perform the engine self test using Engine T est
Mode diagnostic Mode code 0 if the Solenoid is
normal.
3. If not solved by the above directions 1-2,
Replace the engine board.
4. Turn the power off, clear the print job on the
computer, and try printing again.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1815dn

Table of Contents