Dell 1815 Mono Laser Service Manual page 74

Alignment & Adjustments
If the document is jammed in the paper exit area:
a. Open the document cover and turn the release knob
to remove the misfed documents from the document
document output tray.
b. Close the document cover. Then load the documents
back into the ADF.
Service Manual
6-4
2. If you cannot see the paper or the paper does not
move when you pulled, open the document cover.
3. Turn the release knob so that you can easily seize the
misfed document, and remove the document from the
roller or the feed area by carefully pulling it gently to
the right.
4. Close the document cover. Then load the documents
back into the ADF.