Deciding Which Options To Change - Fujitsu DL7600Pro User Manual

USING SETUP MODE
DECIDING WHICH
OPTIONS TO
CHANGE
5-16
The previous page shows a printout of the printer's factory default
settings. In this printout, options are listed by functional group:
Menu 1 settings (MENU1 function)
•
• Menu 2 settings (MENU2 function)
Hardware settings (HARDWRE function)
•
Print position adjustment settings (ADJUST function)
•
• Configuration settings (CONFIG function)
Print head gap adjustment settings (GAP-ADJ function)
•
Most selectable options only alter print features, such as the typestyle,
and page format. However, some options must be selected correctly for
the printer to work properly with your hardware and software.
For each function, Table 5.3 lists items whose options must be selected
correctly for system and printer accessory compatibility.
Function Item
MENU1 EMULATE
MENU2 None
Table 5.3 Required Options
The emulation selected on the printer must be the
same as the emulation selected in your software.
If you selected an emulation when you set up the
printer (Chapter 2), you do not need to change the
EMULATE option unless you want to change to
a different emulation. The emulation assigned to
MENU1 is the default when you turn the printer
on.
See the section MENU1 and MENU2 Items and
Options later in this chapter.
If you use MENU2, the emulation selected for
MENU 2 must be the same as the emulation
selected in your software.
See the section MENU1 and MENU2 Items and
Options later in this chapter.
Option
User's Manual