Device And Operator Actions For Equipment Errors; Device And Operator Actions For Equipment Errors - Fujitsu C150-E049-02EN Oem Manual

Device and
Operator Actions
for Equipment
Errors
5-4
Table 5.1 Device and operator actions for temporary errors (continued)
LCD display Scanner actions
PRINT - Print head is not set.
HEAD - "Temporary Error" is returned
NOT SET to the host computer and an
error message is displayed on
the LCD display.
PRINT - Print head is not set correctly
HEAD or does not work well.
ALARM - "Temporary Error" is
returned to the host compu-
ter and an error message is
displayed on the LCD
display.
Table 5.2 lists the scanner and operator actions for equipment errors.
Table 5.2 Device and operator actions for equipment errors
LCD display Scanner actions
HOPPER - The Check lamp lights and an
ALARM error message is displayed on
the LCD display.
- The mechanism system is
stopped.
TRANS- - The Check lamp lights and an
PORT error message is displayed on
ALARM the LCD display.
- The mechanism system is
stopped.
Action to recover
- Press "STOP" to reset
the error and set the
print head again.
- Press "STOP" to reset
the error and set the
print head again.
- If the error message is
displayed on the LCD
display again, change
the print head.
Action to recover
- Check if the
lamp or heater is
attached
correctly.
Replace lamp
according to the
replacement
method.
- If turning the
power on again
does not recover
the scanner,
contact the
maintenance
personal.
M3099GX/GH OEM Manual