Table of Contents
Advertisement
Loading
Document
Hopper table
Line mark
M3099GX/GH OEM Manual
This section provides how to load documents.
When the LCD display on the operator panel has displayed "Hopper
Empty", supply documents as follows:
Guide
Lock
lever
Document
Extension
Hopper table
1 Set the specified document
width.
Hold the lock lever at the
guide center on the right of
the hopper table and move
it horizontal to set the
document width.
2 Load a document read side
face-up on the hopper table.
Note:
1. Be sure not to load
documents higher than the
line marked inside the guide
on each side of the hopper
table.
2. If the documents are too
long, pull out the extension
at the front of the hopper.
BASIC
OPERATION
4-9
Advertisement
Table of Contents
