Table of Contents
Advertisement
3-60
The window width field specifies the width of window in scan line
direction. The window width is measured using the target's current
measurement unit divisor.
Window Length:
The window length field specifies the length of the window in the
base line direction. The window length is measured using the target's
current measurement unit divisor.
Note: The relation between X-Axis Resolution, Y-Axis Resolution,
X-Axis Upper Left, Y-Axis Upper Left, Window Width,
Window Length.
Upper Left X field value:
Upper Left Y field value:
Width field value:
Length field value:
X Resolution:
Y Resolution:
1) Maximum Scanning Area limitations
0 < (ULX+W) 14592 [1/1200 inch] for M3099GX
0 < (ULY+L)
20736 [1/1200 inch]
2) Width and X Resolution limitation
9
(XR W/1200)
3) Length and Y Resolution limitation
1 £ (YR L/1200)
4) Horizontal and Vertical limitation (M3099GX only)
if ( 13200(11") < (ULX+W) 14592 )
then 0 < (ULY+L)
Brightness:
The brightness field specifies the level of brightness used to scan the
object. A value of zero specifies the default brightness. Any other
value indicates a relative brightness setting with 255 being the
highest setting, one being the lowest setting, and 128 being the
nominal setting.The brightness effects for Halftone image.
0 to 20736 [1/1200 inch]
ULX
ULY
W
L
XR
YR
10368 [1/1200 inch] for M3099GH
4864 [dot] for M3099GX
3456 [dot] for M3099GH
6912 [line]
19842(A3 length) ;
0 to 255
M3099GX/GH OEM Manual
Advertisement
Table of Contents
