M3099GX/GH OEM Manual
Table 3.7 Operation Code Types
Command
Operation
Code(hex)
RESERVE UNIT
16
RELEASE UNIT
17
INQUIRY
12
REQUEST SENSE
03
SEND DIAGNOSTIC
1D
ENDORSER
C1
TEST UNIT READY
00
SET WINDOW
24
SEND
2A
OBJECT POSITION
31
SCAN
18
READ
28
MODE SELECT(6)
15
MODE SENSE(6)
1A
Description
Reserve a logical unit
Release a previously reserved logical
unit
Requests information regarding
parameters of target and its attached
peripheral device(s).
Requests the target transfer sense
data to the initiator
Request the target to perform
diagnostic operations on itself
Start/Stop endorser function
Check if the logical unit is ready
Specify windows within the
scanning range of the device.
Transfers data from initiator to
target
Provids positioning functions (ADF
Feed in/out)
Requests the target begin a scan
operation
Requests the target transfer data to
the initiator
Specify logical unit, peripheral
device parameters from the initiator
to the target
Report parameters from the target to
the initiatot
INTERFACE
3-29