Table of Contents
Advertisement
Pad Replacement
M3099GX/GH OEM Manual
Replace the pad as follows:
WARNING
Wait at least 3 minutes after turning off the power before
replacement.
Upper transport unit
Operator panel
Power switch
Lever
Lever (green)
Roller ASY
14 Push the two levers (green)
towards each other to dis-
engage with the lower
locking holes and lift them
up until they engage with
the two upper locking
holes.
15 Connect the two relay
connectors on the roller
ASY.
16 Close the upper transport
unit. (See page 4-2)
1 Turn off the power switch.
Make sure that the hopper
table is at the bottom.
2 Open the upper transport
unit. (See page B-2)
3 Disconnect the two relay
connectors on the roller
ASY.
4 Push the two levers (green)
towards each other to
disengage with the upper
locking holes and lower
down the two levers until
they engage with the two
levers locking holes.
BASIC
OPERATION
4-21
Advertisement
Table of Contents
